GW Instek GPP-3060 - Page 151

REMOTE CONTROL
151
Example
:DELAy2:STOP?
Queries the current stop condition, back to NONE
or stop condition value.
Command
:DELAy:SYNChronize {ON|OFF}
Function
When both CH1 and CH2 are Delay on, turn on or
off the delay synchronization between them.
Example
:DELAy:SYNChronize ON
turn on the delay synchronization of CH1 and CH2.
Command
:DELAy[1|2]:TIME:GENErate
{FIX|INC|DEC}[,<value0>[,<value1>]]
Function
Sets the method of automatically generated time
and the corresponding parameter of delay.