To Next Page

To Previous Page

REMOTE CONTROL

171

Example

:SEQUence2:TEMPlet:POINTs 10

Sets the CH2 overall points as 10.

Command

:SEQUence[1|2]:TEMPlet:POINTs?

Function

Queries the actively set overall points.

Example

:SEQUence2:TEMPlet:POINTs?

Returns the CH2 actively set overall points.

Command

:SEQUence[1|2]:TEMPlet:RISERate <value>

Function

Sets the rising degree of ExpRise.

Description

<value> Ranges from 0 to 10.

Example

:SEQUence2:TEMPlet:RISERate 10

Sets the rising degree of ExpRise as 10 for CH2.

Command

:SEQUence[1|2]:TEMPlet:RISERate?

Function

Queries the rising degree of the actively set

ExpRise.

Example

:SEQUence2:TEMPlet:RISERate?

Returns the rising degree of the actively set ExpRise

for CH2.

Command

:SEQUence[1|2]:TEMPlet:SELect

{SINE|PULSE|RAMP|UP|DN|UPDN|RISE|FAL

Function

Selects templet type.

Description

Example

:SEQUence2:TEMPlet:SELect SINE

Sets the selected templet type as SINE for CH2.

Command

:SEQUence[1|2]:TEMPlet:SELect?

GW Instek GPP-3060 User Manual

Questions and Answers: