To Next Page

To Previous Page

REMOTE CONTROL

181

Command

:TRIGger:OUT:CONDition? {D0|D1|D2|D3|D4}

Function

Queries the trigger condition from the trigger

output of the specified data line.

Example

:TRIGger:OUT:CONDition? D0

Returns the trigger condition from the trigger

output of D0 data line.

Command

:TRIGger:OUT[:ENABle]

{D0|D1|D2|D3|D4},{ON|OFF}

Function

Enables or disables the trigger output function of

the specified data line.

Description

After enabling trigger output function, the specified

data line will, when the output signal of the

specified controlled channel meets the set trigger

condition, output the specified level or square wave

based on the setting of output signal.

Example

:TRIGger:OUT D0,ON

Enables the trigger output function of D0 data line.

Command

:TRIGger:OUT[:ENABle]?{D0|D1|D2|D3|D4}

Function

Queries the state of the trigger output function of

the specified data line.

Example

:TRIGger:OUT? D0

Returns the state of the trigger output function of

D0 data line.

Command

:TRIGger:OUT:POLArity

{D0|D1|D2|D3|D4},{POSItive|NEGAtive}

Function

Sets the polarity of the output signal from the

trigger output of the specified data line.

GW Instek GPP-3060 User Manual

Questions and Answers: