GW Instek GPP-3060 User Manual

BASIC OPERATION
79
3. Press the F5 (Logic) button to
define logical pattern of other
conditions.
Power
Press the Advance key on control
panel. Select the F4 (Monitor)
function followed by pressing the F3
(Power) button to enter the power
setting.
1. Press the F1 (Set) button. The
setting on LCD is activated and
appears in red font color. Use
number pad to set the parameters
directly; or use arrow keys along
with scroll wheel to complete the
setting.
2. Press the F4 (Define) button to
define terminated condition.
3. Press the F5 (Logic) button to
define logical pattern of other
conditions.
Stop
Type
Press the Advance key on control
panel. Select the F4 (Monitor)
function followed by pressing the F4
(Outoff) button to set output disable;
select F2 (Alarm) to set content
notice; select F3 (Beeper) to set
audible alarm. Buzzer should be
turned on in system settings when
Beeper is enabled, refer to page 96.
Operation
ON/OFF
Press the F5 (MON. On) button to
enter live monitor. MON appears on
the status bar (the color of channel

GW Instek GPP-3060 Specifications

General

Brand	GW Instek
Model	GPP-3060
Category	Power Supply
Language	English