GW Instek GPP-3060 - Page 82

GPP-3060/6030 User Manual
82
number pad to set the parameters
directly and then press the F1 (s)
button to confirm; or use arrow keys
along with scroll wheel to complete
the setting.
Groups
Press the Advance key on control
panel. Select the F5 (Recorder)
function. Press the F2 (Groups)
button to enter setting of recorded
group number. The setting on LCD
is activated and appears in red font
color. Use number pad to set the
parameters directly and then press
the F1 (Done) button to confirm; or
use arrow keys along with scroll
wheel to complete the setting.
Channel
Press the Advance key on control
panel. Select the F5 (Recorder)
function. Press the F3 (Channel)
button to enter setting of recorded
channel. F1 (CH1), F2 (CH2), F3
(CH3) are available for selection.
The numbers of channel may vary
by models.
Memory
Press the Advance key on control
panel. Select the F5 (Recorder)
function followed by pressing F4
(Memory) button to setting of
recorded saving. Recorded data can
be stored in internal memory or
external USB Flash.