User Manual
H3C S1526 Smart Ethernet Switch Chapter 2
Web-based Configuration
2-40
III. Modify
Click the port number in
Figure 2-26 to enter the [VLAN
Modification] page, where you can modify the settings of that
VLAN. Refer to section
2.6.2 II. “Create” for detailed
configuration steps. All steps are the same except the first one,
which is unnecessary for modification purpose.
Figure 2-28 VLAN modification
Note:
If you modify the VLAN configuration of a port that belongs to a
trunk group, the VLAN configurations of the other member
ports of that trunk group will change accordingly.
To Next Page
Loading...
Need help?
General
