H3C S1526 - Page 50

User Manual
H3C S1526 Smart Ethernet Switch Chapter 2
Web-based Configuration
2-39
1) Enter the port-based VLAN ID in the [Port-based
VLAN ID] text box.
2) Select from the port icons the ports to be included in
this port-based VLAN. Click the port icon to mark it
with
, which indicates this port belongs to this
port-based VLAN.
3) In the [Port isolation] column, you can set the port
isolation function for the port-based VLAN. First
enable the port isolation function, and then input the
number of the uplink port to be isolated. The uplink
port is used for connecting the upper-level switch or
router. This step is optional.
4) Click <Apply> on the right to complete and validate the
configuration.
For example, as shown in
Figure 2-27, create port-based
VLAN 7 and set port 7 and port 8 as member ports of this VLAN.
Figure 2-27 Create a port-based VLAN