H3C S1526 User Manual

User Manual
H3C S1526 Smart Ethernet Switch
Chapter 3 Configuration Through
Console Port
3-4
Figure 3-4 Configure terminal communication parameters
4) Configure HyperTerminal properties. In the
[HyperTerminal] page click [File//Properties/Settings]
to enter the [S1526 Properties] window, as shown in
Figure 3-5. Select “VT100” or “Auto detect” as the
emulation type. Click <Apply> to return to the
[HyperTerminal] window.

H3C S1526 Specifications

General

Brand	H3C
Model	S1526
Category	Switch
Language	English