hager h3+ - Page 107

1076LE005550A
Starting, commissioning, operation
4.7 Commissioning via the HTP610H configuration tool
Opening the circuit breaker management session
The configuration software can be accessed by two dierent login sessions:
Administration session Circuit breaker management session
The Administration session facilitates the
following:
The Circuit breaker management session
facilitates the following:
- Manage user accounts
- Update the configuration software
- Generate passwords for HTD210 H and
HTC310H/320H
- Display the information concerning the
version and the software licenses
- Access the menus for managing h3+ LSnI,
LSI, LSIG and Energy trip units.
Note
Access to the test and status display menus is
restricted for the LSnI, LSI and LSIG trip units.
To open a circuit breaker management session from a multimedia tablet, please
proceed as follows:
Action Note/Illustration
1 Open your web browser
and enter the following URL
address:
http://www.htp610h/index.html
2
Enter your configurator
login details
By default, the following
login is available:
Login: Config
Password: config
Click on Login to confirm.
3
Click on Circuit breaker or
MCCB Management*
(*) If you cannot click on Circuit breaker Management, check that the h3+ circuit
breaker is correctly connected to the configuration tool. If the problem continues,
refer to the user manual for the HTP610H configuration tool.
Note
It is also possible to log in to the configuration server using an Ethernet cable from
a computer. For more information, please refer to the user manual for HTP610H
configuration tool.