HALE RSD - Table 39. Gearbox Cooling Tube R&R Tools and Consumables List

107
Table 39. Gearbox Cooling Tube R&R Tools And Consumables List
Standard Tools
Special Tools
Consumables
PPE (Eye and Hand Protection) None Shop Rag(s) (As Required)
PPE (for Handling Oil) Cooling Tube (Gearbox)
<See FSG–PL-01481, Sheet 2, Item 21>
Hacksaw Gasket (Gearbox Cover)
<See FSG–PL-01481, Sheet 2, Item 14>
Midget/Mini Tube Cutter
(for 3/8-in tube)
Adapter 1/2 Male NPT X 3/8 Tube (Gearbox)
<See FSG–PL-01481, Sheet 2, Item 30>
**
7/16-in Wrench Bushing 3/4 MNPT X 1/4 NPT
<See FSG–PL-01483, Sheet 4, Item 25> (AP)
<See FSG–PL-01486, Sheet 4, Item 26> (MBP)
**
1/2-in Wrench Bushing 3/4 X 1/4 NPT
<See FSG–PL-01487, Sheet 4, Item 28> (RSD)
**
13 mm Wrench
(or socket and driver))
Elbow 1/4 NPT X 3/8 Comp
<See FSG–PL-01482, Sheet 4, Item 26> (CBP)
**
9/16-in Wrench Elbow 3/8 Comp X 3/8 MNPT
<See FSG–PL-01483, Sheet 4, Item 21> (AP)
<See FSG–PL-01486, Sheet 4, Item 27> (MBP)
<See FSG–PL-01487, Sheet 4, Item 6> (RSD)
**
5/8-in Wrench Elbow 3/8 Comp X 3/8 Comp
<See FSG–PL-01483, Sheet 4, Item 19
*
> (AP)
<See FSG–PL-01482, Sheet 4, Item 17
*
> (CBP)
<See FSG–PL-01486, Sheet 4, Item 22> (MBP)
<See FSG–PL-01487, Sheet 4, Item 14> (RSD)
**
16 mm Wrench Fitting 3/8 Hose Barb X 3/8 Tube
<See FSG–PL-01483, Sheet 4, Item 23> (AP)
<See FSG–PL-01482, Sheet 4, Item 16> (CBP)
<See FSG–PL-01486, Sheet 4, Item 23> (MBP)
<See FSG–PL-01487, Sheet 4, Item 7> (RSD)
**
7/8-in Wrench Hose (Water Line)
<See FSG–PL-01483, Sheet 4, Item 22> (AP)
<See FSG–PL-01482, Sheet 4, Item 22> (CBP)
<See FSG–PL-01486, Sheet 4, Item 24> (MBP)
<See FSG–PL-01487, Sheet 4, Item 25> (RSD)
**
1–1/16-in Wrench Tee 3/8 Comp X 1/4 MPT X 1/4 FPT
<See FSG–PL-01482, Sheet 4, Item 25> (CBP)
Tee 3/8 Comp X 1/4 MNPT
<See FSG–PL-01483, Sheet 4, Item 24> (AP)
<See FSG–PL-01486, Sheet 4, Item 25> (MBP)
<See FSG–PL-01487, Sheet 4, Item 27> (RSD)
Loctite™ 580 (Or Equivalent)
* Alternate part is a Tee (3/8 Comp union).
** Alternatively a 10 inch (thru 15 inch) adjustable wrench may be used.