13
Hall in Tirol, 01.01.2017
Edge sanders
HS 950
EG-Declaration of Conformity
According to Machine Guidelines 2006/42/EG
We hereby declare that the machine indicated below, which corresponds to the design and construction of the model
we placed on the market, conforms with the health and safety requirements as stated by the EC.
Manufacturer: FELDER KG
KR-FELDER-STR.1
A-6060 Hall in Tirol
Product designation: Edge sanders
Make: Hammer
Model designation: HS 950
The following EC guidelines were applied: 2006/42/EG
2014/35/EU
2014/30/EU
This EC Declaration of Conformity is valid only if the CE label has been affixed to the machine.
Modifying or altering the machine without the express written agreement of the manufacturer shall render the
warranty null and void.
The signatory of this statement is the appointed agent for
the compilation of the technical information.
3 Declaration of Conformity
Declaration of Conformity
Johann Felder, Managing Director FELDER KG
KR-FELDER-STR.1 A-6060 Hall in Tirol
To Next Page
Loading...
