22
!
!
Edge sanders
HS 950
6.1 Safety instructions
Warning! Risk of injury!: There is a risk of injury as a result of falling parts while transporting, loading or
unloading the machine.
Attention! Risk of material damage!: The machine can be damaged or destroyed if it is subjected to improper
handling during transport.
For this reason the following safety instructions must be
observed:
• Never lift loads over a person.
• Always move the machine with the utmost care and
caution.
• Only use suitable lifting accessories and hoisting
devices that have a sufficient load-carrying capacity.
• Consider the machine's centre of gravity when trans-
porting it (minimise the risk of it tipping over).
• Take measures to prevent the machine from slipping
sideways.
• Ropes, belts or other hoisting devices must be
equipped with safety hooks.
• Do not use torn or worn ropes.
• Do not use knotted ropes or belts.
6.2 Transport
Attention! Transport the machine according to the enclosed transport and assembly instructions!
Due to technical reasons, the machine is delivered in a
partly dismantled state.
The machine may be transported using a crane, pallet
truck or forklift truck.
6 Transport, packaging and storage
• Ensure that ropes and belts do not lie against sharp
edges.
• Transport the machine as carefully as possible in or-
der to prevent damage.
• Avoid subjecting the machine to shocks.
• When transporting the machine overseas, ensure that
the packaging is airtight and that a desiccant is
added to protect the metal parts against corrosion.
Transport, packaging and storage
Attention! Risk of material damage!: Do not lift the machine by its work table, extension frames or handwheels.
To Next Page
Loading...