2
Edge sanders
HS 950
Attention!: The machine must be inspected immediately upon arrival. If the machine has been damaged du-
ring transport, or if any parts are missing, a written record of the problems must be submitted to the forwar-
ding agent and a damage report compiled. Also be sure to notify your supplier immediately.
For the safety of all personnel, it is necessary to study this manual thoroughly before assembly and operati-
on. This manual must be kept in good condition and should be considered as part of the machine. Furthermo-
re, the manual must be kept to hand and within the vicinity of the machine so that it is accessible to operators
when using, maintaining or repairing the machine.
Note: Year of construction
The machine number of this machine will be printed on the cover sheet of this operating manual.
The final two digits of the machine number show the year of construction of this machine.
e.g. XXX.XX.XXX.19 -> year of manufacture 2019
© FELDER KG
KR-FELDER-STR.1
A-6060 Hall in Tirol
Tel.: +43 (0) 5223 / 45 0 90
Fax: +43 (0) 5223 / 45 0 99
Email: info@hammer.at
Internet: www.hammer.at
Hammer
A product of the FELDER GROUP!
To Next Page
Loading...
