8 - Technical Specifications
154
Materials and Recycling
Disposal of the Sprayer
When the equipment has completed its working life, it must be thoroughly cleaned.
The tanks, hoses and synthetic fittings can be incinerated at an authorized disposal plant.
The metallic parts can be scrapped. Steel parts are made of various types of treated steel.
Always follow local legislation regarding disposal.
Materials Used
Disposal of Cleaning Water
Protect the environment.
When cleaning the sprayer inside and outside, dispose of chemical
residues in the liquid system and water containing cleaning agent
according to local regulations.
Tanks: Plastic (HDPE)
Chassis: Steel
Boom: Steel, aluminum
Tires: Rubber
Mudguards: Plastic (PE)
Grey side shields: Plastic (PE)
Air blower housing: Steel
Air impeller blades: Glass reinforced plastic (PA)
Air guide on boom: Aluminum
Bag for air guide: Plastic (PVC)
Pump housing: Grey cast iron (GG200)
Pump diaphragms: Plastic (PUR)
Hoses (suction lines): Plastic (PVC)
Hoses (pressure lines): Rubber (EPDM)
Valves: Glass reinforced plastic (PA)
Hose and pipe fittings: Glass reinforced plastic (PA)
Filter housings: Plastic (PP)
Nozzles: Plastic (POM)
To Next Page
Loading...
Need help?
General
