3 - Description
3.2
Identification plates
The HARDI® ZENIT sprayer is designed for the application of chemical crop protection products and liquid fertilizers. This
equipment may only be used for this purpose. Using the sprayer for any other purpose is not allowed.
Even if no local law requires that the operator must be certified to use the spray equipment, it is strongly recommended
to be trained in correct plant protection and in safe handling of plant protection chemicals to avoid unnecessary risk for
persons and the environment when doing the spray job.
Use of the ZENIT sprayer
The serial number plate is riveted onto the left hand side of the
frame, indicating the make, model and serial number of the sprayer.
The frame is manufactured with a tubular profile which provides great durability and resistance to breakages and vibra-
tions. To protect it from corrosion, it is sanded down and covered with a layer of special paint that contains a
polyurethane bi-component with anti-corrosion additives and protection against ultraviolet rays.
The tank is made of medium-density polyethylene with ultraviolet filters, it has smooth, rounded surfaces that facilitate
agitation and cleaning. Range of volumes: 105 gal. (400 Liters) and 155 gal. (600 Liters).
Tank
Frame
To Next Page
Loading...
