EasyManua.ls Logo

Hardi ZENIT - Service and Maintenance Intervals

Hardi ZENIT
64 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6 - Maintenance
6.2
1. Clean the suction filter
2. Clean the pressure filters
3. Clean the nozzles
4. Check for leaks in the liquid circuit
5. Make sure no air can get into the suction circuit
After every 10 hours
Service and Maintenance intervals
1. Carry out the maintenance mentioned above
2. Check the pressure in the pressure damper
3. Check the transmission shaft
4. Check the mechanical clutch
5. Grease the diaphragm pump
After every 50 hours
1. Carry out the maintenance mentioned above
2. Check the hydraulic hoses (if equipped)
3. Change the oil in the gearbox
After every 250 hours
1. Carry out the maintenance mentioned above
2. Service check of the transmission shaft
3. Service check of seals in liquid circuit
4. Service check of the pump
5. Service check of the gearbox
6. Check the pressure gauge
7. Service check of the blower unit
After every 1000 hours

Table of Contents

Related product manuals