3 - Description
3.10
The centrifugal turbines on HARDI® ZENIT sprayers have been designed with galvanized steel. Their aerodynamic design
offers a higher quantity and better distribution of air, less noise and less power consumption. They include a centrifugal
clutch for smoother starting and stopping.
Flow levels for the P540 (22”) fan can achieve 6,500 cfm (11,000 m
3
/h).
DANGER! The tractor P.T.O. should never exceed 540 r.pm. as there is grave danger of causing the air kit to explode.
DANGER! Keep away from the air inlets and outlets while the fan is on. Some objects may be expelled from the air
outlet or a piece of cloth could be sucked into the air inlet.
The blower unit is the most dangerous part of the machine. Do not try to change any of the parts without consulting
your nearest dealer beforehand. Adjusting blower units in order to change their characteristics should only be done by
qualified people.
On all pneumatic blower unit models, there are protection guards. They are fundamental for avoiding accidents and
stopping foreign objects from getting inside the fan.
Protection guards
DANGER! Use of the air kit without protection guards is not
permitted.
DANGER! Do not take the protection guards off the equip-
ment while it is in use.
DANGER! Do not go near the fan when the equipment is in
use if you are wearing light or loose clothing.
DANGER! Never put foreign objects inside the turbine via the
guard, regardless of whether it’s in use or not.
DANGER! Protect your ears from the fan noise by wearing
appropriate hearing protection.
DANGER! If you notice vibrations or hammering, turn the fan
off immediately.
Centrifugal turbine - Technical information
Centrifugal blower unit
To Next Page
Loading...
