3 - Description
3.7
The axial fans on HARDI® ZENIT sprayers have been designed with composite blades. Their aerodynamic design offers a
higher quantity and better distribution of air, less noise and less power consumption. They include a centrifugal clutch for
smoother starting and stopping.
Flow levels for the AG820 (32”) fan can achieve 23,500 cfm (40,000 m
3
/h) depending on the adjustments made to it’s
components.
Axial fan - Technical information
Axial blower unit
DANGER! The tractor P.T.O. should never exceed 540 r.pm. as there is grave danger of causing the air kit to explode.
On all axial blower unit models, there are protection guards. They are fundamental for avoiding accidents and stopping
foreign objects from getting inside the fan.
Protection guards
DANGER! Use of the air kit without protection guards is not
permitted.
DANGER! Keep away from the air inlets and outlets while the fan is on. Some objects may be expelled from the air
outlet or a piece of cloth could be sucked into the air inlet.
The blower unit is the most dangerous part of the machine. Do not try to change any of the parts without consulting
your nearest dealer beforehand. Adjusting blower units in order to change their characteristics should only be done by
qualified people.
DANGER! Do not take the protection guards off the equip-
ment while it is in use.
DANGER! Do not go near the fan when the equipment is in
use if you are wearing light or loose clothing.
DANGER! Never put foreign objects inside the fan via the
guard, regardless of whether it’s in use or not.
DANGER! Protect your ears from the fan noise by wearing
appropriate hearing protection.
DANGER! If you notice vibrations or hammering, turn the fan
off immediately.
To Next Page
Loading...
