ASSEMBLY AND INSTALLATION
33
6
6-10 ATTACHING TOP BOX
● The Top Box weighs in excess of 20kg. Use at least two people when carrying
out this operation. Trying to carry out this work single handedly may result in
injury or component damage.
1
Using at least two people and adequate
ladders and/or stepping equipment, raise
the top box into position and align with the
xing points on the top of the cabinet.
2
Secure the (1) M8 xing within the ASSY ROOF PANEL in the orientation “up” (starting from inside the
cabinet with the xing facing out).
FIG. 6-10a
FIG. 6-10b
TOP BOX