EXPLANATION OF TEST AND DATA DISPLAY
77
9
9-7 COIN SETTINGS
This part of the test menu is used to set credit related parameters. Select COIN from the Test menu to display the
Coin Settings Menu.
Use the SERVICE button to move the cursor to the desired test item.
Press the TEST button to enter the selected item.
This text displays the accumulative coins and credits values. Freeplay can be turned on/o by cycling through the
Credit Settings options.
COIN COUNT: Coin count value from IO board (cannot be reset)
CREDITS: Total number of credits added to system
SERVICE CREDITS: Total number of Service credits added to system
ENTRY TYPE: Payment Method (COIN*\CARD\ SWIPE)
COIN SETTING: The following coin settings are available:
SETTING #1 1 COIN 1 CREDIT
SETTING #2 2 COINS 1 CREDIT
SETTING #3 3 COINS 1 CREDIT
SETTING #4 4 COINS 1 CREDIT
SETTING #5 5 COINS 1 CREDIT
SETTING #6 1 COIN 2 CREDITS
SETTING #7 1 COIN 3 CREDITS
SETTING #8 1 COIN 4 CREDITS
SETTING #9 1 COIN 5 CREDITS
SETTING #10 FREEPLAY
FIG. 9-7a COIN Screen
To Next Page
Loading...
Need help?
General