52
PRECAUTIONS WHEN MOVING THE MACHINE
7
If an entrance is narrow, follow the process detailed below to
separate the Monitor Cabinet and Rear Cabinet.
When the Monitor Cabinet and Rear Cabinet are separated, take
due care during all moving operations. Hold the bottom surface
as much as possible and move the component slowly.
FIG. 7-2a MAIN CABINET
● Do not carelessly separate the components of the Monitor Cabinet. This may
lead to accidents during maintenance and electric shocks/short circuits during
operation.
● After separation of the Monitor Cabinet, the Rear Cabinet is not sufciently
strong. Take care which places you push or pull. Do not turn the components
onto their sides. This may lead to disgurement or damage and could cause
accidents during maintenance (possibly leading to irrepairable damage).
● To work safely and precisely, prepare a steady safety stool or ladder to stand
on. Climbing onto the cabinet or hanging down from it can lead to accidents.
● Perform the separation operation with at least two people. Performing the
operation alone could lead to an accident.
If the only way to get the separated components into a desired location is to
turn them onto their side, or if a separation method other than those described in
this manual is required, contact the ofce listed in this document or the place of
purchase. Turning the components onto their side may disgure or misalign the
cabinet and could lead to irreparable damage.
To Next Page
Loading...
Need help?
General