76
EXPLANATION OF TEST AND DATA DISPLAY
9
FIG. 9-6a CALIBRATION Screen
9-6 DEVICE CALIBRATION
Perform individual calibration of the control units for the 1P side and 2P side.
The current maximum and minimum individual volume values will be reset when entering the Gun Calibration
Screen.
<Operation>
1
Slowly move the control unit you wish to adjust to each of the four corners of the screen, pulling the trigger
at each corner’. The values will set automatically.
2
Press the TEST Button and the calibration settings will be altered to reect all changes made before return-
ing to the GAME TEST Mode screen.
Calibration is relevant to operability. Manipulate and adjust the control unit with
appropriate force. Do not make adjustments with excessive force.
To Next Page
Loading...
Need help?
General