EXPLANATION OF TEST AND DATA DISPLAY
71
9
9-2 SYSTEM TEST MODE
In the system test mode, the main activities include checking RING EDGE 2 information and actions and the setting
of coin/credit. Also, a screen appears for checking screen adjustments. For details, see the RING EDGE 2 service
manual, which is provided separately.
Use the following settings with this product. If the settings are not as specied, error messages might appear and
operations might not be normal:
● COIN ASSIGNMENTS
COIN CHUTE TYPE: COMMON
SERVICE TYPE (SERVICE Button Type): COMMON
● NETWORK SETTING
NETWORK TYPE: MAIN
MAIN NETWORK: Setting Not Required.
1
When the TEST Button is pressed, the system test mode menu screen (SYSTEM TEST MODE) appears.
2
Use the SERVICE Button to move the cursor to the desired test item.
3
Press the TEST Button to conrm selection of the item.
4
When testing and checking are completed, select EXIT and press the TEST Button.
The SYSTEM TEST MODE screen reappears.
5
When all tests are completed, select EXIT and press the TEST Button. The game screen reappears.
● The details of changes to Test Mode settings are saved when you exit from Test
Mode by selecting EXIT from the system test mode menu. If the power is turned
off before that point, changes to the settings will not be saved.
● Use with the specied settings. If settings other than those specied are used,
inappropriate operations or malfunction may occur.
To Next Page
Loading...
Need help?
General