PRECAUTIONS WHEN MOVING THE MACHINE
51
7
FIG. 7-1a
FIG. 7-1b
Separate components when moving over a sloped or stepped area.
● When moving the cabinet, do not hold, push, or pull the Control Units. This may
disgure or damage them.
● If you need to move components through a narrow or low door and the only
way to get the separated components through is to turn them on their side, or
if a separation method other than those described in this manual is required,
either make a request to the ofce listed in this document or the place of pur-
chase to perform the operation or contact them regarding how to perform it.
Carelessly turning the components onto their side or separating them in ways
other than those depicted in this manual may lead to irreparable damage.
● Do not press the monitor screen. The screen can be easily damaged and can-
not be repaired if it is, meaning complete replacement will be necessary.
Move with the casters touching the oor.
To Next Page
Loading...
Need help?
General