44
ASSEMBLY AND INSTALLATION
6
3
Fully insert the power cord plug into the outlet.
4
When using a ground wire made available separately, connect one
end of the wire to the AC unit ground terminal and the opposite end
to an indoor ground terminal. The AC unit ground terminal is a bolt-
and-nut combination. Remove the nut and pass the bolt through the
ground terminal, then secure the nut to the bolt. <For Taiwan>
5
The power cord is laid out indoors. Protect the
power cord by attaching wire cover to it.
If ground will be established with a ground wire
made available separately, lay out the ground
wire indoors and have it protected.
<For Taiwan>
FIG. 6-16c
FIG. 6-16d