EasyManuals Logo

heat-timer Multi-MOD Platinum User Manual

Default Icon
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image

HT# 059299-00 A

Content 2
Multi-MoD PlatinuM overview 3
Standard Features 3
Optional Features 4
MoDulation ConCePt 4
unDerstanDing oPeration ConCePt 5
Reset Ratio/Outdoor Reset 5
Space Feedback Concept 6
initial Pilot PrograM 7
Make Sure You Have the Right Control 7
Multi-MoD PlatinuM FunCtion Chart 8
Multi-MoD PlatinuM BaCk Chart 9
extension FunCtion Chart 10
extension BaCk Chart  11
installation 12
Mounting the Enclosure 12
Activate the Battery 12
Remote Communication Wiring 12
BACnet MSTP or Modbus RS485 Wiring 12
Internet or BACnet IP Ethernet Wiring 13
Input Wiring 17
Outdoor sensor 17
System Sensor 17
4-20mA Temperature Sensor Wiring 18
Setback Wiring 20
Interfacing to MPC 20
Interfacing to HWR 20
Connecting Multi-MOD Platinum to Extensions 21
External Set Point Wiring 22
Connecting Internet communication 22
Connecting BACnet Communication 22
Connecting MODBUS Communication 22
Network Sensors Wiring 22
Modulating Output Card Installation 23
DisPlay 23
Button FunCtions 23
DisPlay stage MoDulation status 24
Display Messages 24
systeM startuP Menu 25
systeM startuP 26
Sensor Type 26
Sensor Type Table 26
System Temperature Sensor Type 26
EMS Input Mode 27
Stage Interface 27
DHW Set Point 29
Sensor Fault 29
Fast Cool Down 30
Day Light Saving 30
systeM settings Menu 31
systeM settings 32
Season 32
Set Point 32
Outdoor Cutoff Temperature 32
Outdoor Reset Settings 32
Reset Ratio 33
Target Offset 33
Minimum Target 33
Maximum Target 34
System Run-On 34
stage MoDulation 36
Gain 36
Purge Delay 36
Lag Delay 37
Standby Time 37
Last-Stage-Hold 37
Soft-off Delay 37
Modulation Speed 38
Lead Stage Rotation 38
Lead Stage 38
Lead Auto Rotate 38
stage settings 39
Stage Menu 39
Moving Around the Stages Menus 39
Mode 39
Ignition % 40
Modulation Start 40
Copy Settings (Stage A Only) 41
sCheDules Menu 42
Schedules 42
Shift 42
Day/Night Schedule 43
Copy Schedule 44
Set Date and Time 44
Vacation Schedule Setting 44
CoMMuniCation Menu 45
Internet Communication 45
Space Lockout 45
Day and Night Target 46
Space Feedback Gain 46
BACnet Communication 46
Modbus Communication 46
MaintenanCe Menu 47
System and Outdoor Sensor Trim 47
Stage Output Trim 47
seCurity 48
Password Enabled 48
Password Change 48
reset Control to FaCtory DeFaults 48
trouBleshooting 49
sPeCiFiCations 51
Multi-MOD Platinum Specications 51
Extension Module Specications 51
wiring DiagraMs 52
warranty 58

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the heat-timer Multi-MOD Platinum and is the answer not in the manual?

heat-timer Multi-MOD Platinum Specifications

General IconGeneral
Brandheat-timer
ModelMulti-MOD Platinum
CategoryController
LanguageEnglish