HT# 059299-00 A
• The Password is used to prevent unauthorized users from making
changes to the Multi-MOD
• Enabling up the Password is not recommended as it slows down
access, makes servicing more difcult, and can disable the system if
management or ownership should change
/<Maintenance>/Password
• When the Password is enabled, none of the settings can be changed
without entering the Password
• Once the Password is entered, you can make multiple changes The
Password expires 5 minutes after the last change is made
• The default Multi-MOD Platinum Password is
MMOD
• At the Login screen, you will have to enter the Password Turn the Adjust
knob until the desired letter is shown Then, press the Adjust button to
move on to the next letter
PASSWORD ENABLED?
NO
YES
CHANGE PASSWORD?
NO
YES
-- NEW PASSWORD --
ENTER NEW PASSWORD
****
------- LOGIN -------
ENTER PASSWORD
M***
-- NEW PASSWORD --
REENTER NEW PASSWORD
****
/<Maintenance>/Password/Change Password?
• Follow the instructions to use the default Password, but select Yes when
prompted to change the Password?
• Enter your new Password in the New Password screen Turn the Adjust
knob until the desired letter is shown Then press the Adjust button to
move on to the next letter The password must consist of 4 letters
• To conrm the password, it must be re-entered when prompted
If the Password was enabled
Make sure to write it down
and store it in a safe location
known to at least one
additional authorized user
• To reset the control to factory defaults, turn off the control power Then
re-power the control back
• During the count down, hold down the Adjust and Next buttons until the
"Total Clear Started" message displays
If total reset was performed, all
saved settings including any
custom control password will
be lost
TOTAL CLEAR STARTED
Release buttons
and
Please wait
To Next Page
Loading...
Need help?
General