Hettich EBA 280 S - Technical Specifications

EN
50/165
5 Technical specifications
Manufacturer
Andreas Hettich GmbH & Co. KG
D-78532 Tuttlingen
Model EBA 280 EBA 280 S
Type 1101 1101-01 1102 1102-01
Mains voltage ( 10%) 200 - 240 V 1 100 - 127 V 1
200
- 240 V 1 100 - 127 V 1
Mains frequency 50 - 60 Hz 50 - 60 Hz
50 - 60 Hz 50 - 60 Hz
Connected load 185 VA 185 VA 330 VA 330 VA
Current consumption 0.85 A 1.75 A 1.6 A 3.0 A
Max. capacity 6 x 50 ml
Allowed density
1.2 kg/dm
3
Speed (RPM) 6000
Force (RCF) 4146 5071
Kinetic energy 2700 Nm
Obligatory inspection (BGR 500) no
Ambient conditions (EN / IEC 61010-1)
 Set-up site
Indoors only
 Altitude
Up to 2000 m above sea level
 Ambient temperature
2°C to 40°C
 Humidity
Maximum relative humidity 80% for temperatures up to 31°C, linearly
decreasing to 50% relative humidity at 40°C.
 Excess-voltage category
(IEC 60364-4-443)

 Pollution degree
2
Device protection class

Not suitable for use in explosion-endangered areas.
EMC
 Emitted interference,
Interference immunity
EN / IEC
61326-1,
Class B
FCC Class B EN / IEC
61326-1,
klasse B
FCC Class B
Noise level (dependent on rotor)
 51 dB(A)
 56 dB(A)
Dimensions
 Width
326 mm
 Depth
400 mm
 Height
242 mm
Weight approx. 11 kg