Hettich EBA 280 S - Calling Up Programs; Saving Programs

EN
61/165
15.2 Calling up programs
Example:
RPM display (RPM)
Example:
RCF display ( RCF )
PROG
 Press the key.
PROG RCL : Program location of the
displayed centrifugation parameters.
PROG t/min:sRPM PROG t/min:sRPM

 With the keys, set the program location
whose centrifugation parameters are to be
displayed.
PROG t/min:sRPM PROG t/min:sRPM

START
PULSE
 Press the key.
The centrifugation parameters are
displayed.
PROG t/min:sRPM
PROG t/min:sRPM
PROG t/min:sRPM
PROG t/min:sRPM
15.3 Saving programs
Example:
RPM display (RPM)
Example:
RCF display (
RCF )
PROG
 Press the key twice.
PROG STO : Program location where the
centrifugation parameters are stored.
PROG t/min:sRPM PROG t/min:sRPM

 With the keys, set the program location
where the centrifugation parameters are
to be stored.
PROG t/min:sRPM PROG t/min:sRPM

START
PULSE
 Press the key.
The centrifugation parameters are stored
at the program location.
PROG t/min:sRPM
PROG t/min:sRPM
PROG t/min:sRPM
PROG t/min:sRPM