Hettich EBA 280 S - Automatic Unlocking of the Lid after the Centrifugation Run

EN
71/165
20.4 Automatic unlocking of the lid after the centrifugation run
It can be set whether the lid should automatically unlock or not after the centrifugation run.
With the rotor at a standstill, this can be set as follows:
The procedure can be aborted at any time by pressing the
STOP
OPEN
key. In this case, the settings are not stored.
 Press and hold the button for eight
seconds.
PROG t/min:sRPM

 Press the key until the following is
displayed:
PROG t/min:sRPM

START
PULSE
 Press the key.
PROG t/min:sRPM PROG t/min:sRPM

 Press the key until one of the following is
displayed:
Lid AutoOpen : Automatic unlocking of
the lid after the centrifugation run.
off : Lid does not unlock automatically.
on : Lid unlocks automatically.
PROG t/min:sRPM PROG t/min:sRPM

 With the keys, set off or on.
PROG t/min:sRPM PROG t/min:sRPM

START
PULSE
 Press the key to save the setting.
PROG t/min:sRPM
PROG t/min:sRPM

STOP
OPEN
 Press the key once to exit the "
Settings"
menu or press twice to exit the "
MACHINE MENU
".
PROG t/min:sRPM
Example:
PROG t/min:sRPM