Hettich EBA 280 S - Short-Term Centrifugation; 17 Emergency Stop

EN
64/165
16.3 Short-term centrifugation
Example:
RPM display (RPM)
Example:
RCF display ( RCF )
RCF
 Press the key to activate the RPM display
(RPM) or the RCF display ( RCF ) as
needed. The LED above the key is
illuminated if the RCF display (
RCF ) is
activated.
PROG t/min:sRPM PROG t/min:sRPM

 Input the desired centrifugation parameters (see the
"Programming" chapter).
PROG t/min:sRPM PROG t/min:sRPM

START
PULSE
 Press the key and keep it pressed.
During the centrifugation run, the rotor
speed or the resulting RCF value and
elapsed time are displayed.
PROG t/min:sRPM PROG t/min:sRPM

START
PULSE
 Release the key again.
The centrifugation run is ended.
The run-out occurs with the set brake
stage. The brake stage is displayed.
Example
7.
PROG t/min:sRPM PROG t/min:sRPM
17 Emergency Stop
Example:
RPM display (RPM)
Example:
RCF display (
RCF )
STOP
OPEN
 Press the key twice.
During the Emergency Stop, the run-out
occurs at brake stage 9 (shortest run-out
time). Brake stage
9 is displayed.
PROG t/min:sRPM PROG t/min:sRPM