EN
82/165
Message / fault Cause Remedy
CTRL ERROR 22 – 25.4
CRC ERROR 27, 27.1
COM ERROR 31 – 36
FC ERROR 60,
61.1 – 61.21,
61.64 – 61.142
Error / defect electronics
Perform a MAINS RESET when the
rotor has been stationary.
TACHO ERR 61.22
FC ERROR 61.23
Speed measurement error
The device must not be switched off
as long as the "wait" message is
being displayed. After the message
"wait ...!" is no longer displayed,
carry out a MAINS RESET.
FC ERROR 61.153 Error / defect electronics
Perform a MAINS RESET.
Check the loading of the rotor, see
chapter "Loading the rotor".
Repeat the centrifugation run.
VERS. ERR 61.154 Invalid machine version
Perform a MAINS RESET.
To Next Page
Loading...
