Hexagon Absolute Arm RS5 - Calculation

Measure with the arm
H00007091 - Absolute Arm User Manual │Version 5.2.0 (2019-03-07) │143
Calculation
RDS calculates now the new alignment of the probe and shows the result.
Check and validate the result.
Enter then the name to give to the probe and validate both next prompts
Probe alignment is finished.
Residual deviation=0.019797
Do you wish to use calculated alignment ?
Please wait.
Step=9, Residual error=0.019797, Improvement=0.005339%
Cancel
Yes No
Report
What is the name of the probe ?
OK
Cancel
NCP2
Specs will now be updated. Do you want to continue?
Yes
No