Maintenance & Troubleshoot
H00007091 - Absolute Arm User Manual │Version 5.2.0 (2019-03-07) │171
Cleaning
1. Use a microfiber cloth to clean the glass. Apply VERY LIGHT pressure to the lens when cleaning! If
there is some adhesive dirt use a “soft” cleaning alcohol like Isopropanol to remove the dirt.
2. Move and rotate the cloth to get best results
3. Use a cotton bud (Q-Tip) and a microfiber cloth to clean the glass in front of the laser. Apply VERY
LIGHT pressure to the lens when cleaning!
4. If there is some adhesive dirt use a “soft” cleaning alcohol like Isopropanol to remove it.
5. Use compressed air to remove the remaining dust from the glasses.
(If you use compressed air from a fingertip dispenser please be aware that in some cases
the spray could contain also parts of the propellant which causes pollutions).
To Next Page
Loading...
Need help?
General
