Components description
H00007091 - Absolute Arm User Manual │Version 5.2.0 (2019-03-07) │54
B.6.2 NON-CONTACT TUBE PROBES
Non-contact tube probes are designed for tube measurement with dedicated software. The two infrared
beams allow measurement without touching the tube.
a. TKJ connector
b. BT
c. Handle
d. Laser On/Off Button
e. Protection O-ring
f. Laser guide emitter
g. Forks
h. Infrared beams
i. Infrared emitters / sensors
j. Bumpers
Buttons
2 buttons are available on the NCT probes:
• Trigger Button: This is the same function as the Trigger button on the arm. Its
closer location makes easier the use of BT when handling the NCT probe.