Maintenance & Troubleshoot
H00007091 - Absolute Arm User Manual │Version 5.2.0 (2019-03-07) │178
Can a RA8 arm be used in RDS
4.3 or earlier?
You can definitely not use an Absolute Arm RA8 (6 or 7
axes) with RDS 4.3. V5.0 is the minimum version to be
used with a RA8. In general, you should always update
with the latest version of RDS, available for free on
Hexagon Manufacturing Intelligence web site.
What residual error values should
the probes have in RDS?
The result of alignment in RDS only shows a global error
which definition depends on the type of probe and
method. Any operator should display the alignment
details, to see if the probe results are correct or not.
To Next Page
Loading...
Need help?
General
