ID5000 Series Smart Code Reader User Manual
38
4. Repeat other optional steps mentioned in drawing single group of ROI according to actual
demands.
5. (Optional) Enable ROI Link IO Enable in Algorithm Control, and there will be prompts by the
output device when codes are not read in any ROI.
Note
Make sure that the output device is connected when using this function.
Figure 8-14 Draw ROI in Batch
Draw ROI via Chessboard
Steps
1. Go to Algorithm Settings, click All Features, and find Algorithm ROI.
2. Click Execute in Chessboard ROI, set parameters according to actual demands, and click OK
after setting.
To Next Page
Loading...
