ID5000 Series Smart Code Reader User Manual
39
Figure 8-15 Create Chessboard ROI
3. Click after creating ROI, and the red frame becomes green as shown below.
Figure 8-16 Draw ROI via Chessboard
4. (Optional) Click to restore the ROI to the full screen, and click to clean all configured
ROIs.
5. Repeat other optional steps mentioned in drawing single group of ROI according to actual
demands.
6. (Optional) Enable ROI Link IO Enable in Algorithm Control, and there will be prompts by the
output device when codes are not read in any ROI.
Note
●
Make sure that the output device is connected when using this function.
●
The figures above are for reference only, and refer to the actual conditions.
To Next Page
Loading...
