HikRobot ID5000 Series - Page 68

ID5000 Series Smart Code Reader User Manual
59
Select Frame Burst Stop Active
If you select Frame Burst Stop Active as Line Out Activation Event, you can set its output delay
time and duration.
Line Out Delay Time
It sets the delay time for outputting the output signal.
Line Out Duration
It sets the time duration of the output signal.
Figure 8-44 Select Frame Burst Stop Active
Select Exposure Start Active
If you select Exposure Start Active as Line Out Activation Event, you can set its output delay time
and duration.
Line Out Delay Time
It sets the delay time for outputting the output signal.
Line Out Duration
It sets the time duration of the output signal.
Figure 8-45 Select Exposure Start Active