HIKVISION DS-2CD6986F-H - Page 107

User Manual of PanoVu Series Network Camera
100
1. Enter IP Address Filter interface:
Configuration > System > Security > IP Address Filter
Figure 7-13 IP Address Filter
2. Check the Enable IP Address Filter checkbox.
3. Select the type of IP Address Filter in the dropdown list, Forbidden and Allowed are selectable.
4. Set the IP Address Filter list.
 Add an IP Address
Steps:
(1) Click Add to add an IP.
(2) Input the IP Adreess.
Figure 7-14 Add an IP
(3) Click OK to finish adding.
 Modify an IP Address
Steps:
(1) Left-click an IP address from filter list and click Modify.
(2) Modify the IP address in the text filed.