User Manual of PanoVu Series Network Camera
Figure 6-15 VCA Configuration (Camera 2 and Camera 3)
The setting of VCA configuration can be divided into three modes.
Behavior Analysis Configuration
For the configuration of behavior analysis, refer to the flowchart below.
Select Behavior Analysis as VCA Resource.
Set Overlay & Capture.
Set Zoom Ratio.
Set parameters in VCA > Advanced
Configuration.
Set scene parameters and rules in VCA > Scene
Configuration.
Set Arming Schedule, Alarm Linkage and Scene
Auto-switch (optional) of the scene.
Save the settings.
Figure 6-16 Flowchart of Configuring Behavior Analysis
Behavior Analysis & Face Capture Configuration
For the configuration of behavior analysis & face capture, refer to the flowchart below.
To Next Page
Loading...
Need help?
General
