User Manual of PanoVu Series Network Camera
Figure 6-32 Draw Line
4. Click the dropdown list in the rule list to select the crossing direction.
Figure 6-33 Select Crossing Direction
5. Enable rules: Check the Enable checkbox of each rule in the rule list to enable the rule.
6. Click to save the settings.
Intrusion
Purpose:
This function can be used for detecting whether there are people, vehicles and objects intrude
into the pre-defined region longer than the set duration. The alarm will be triggered if the rule is
broken.
Steps:
1. Create new rule: Click add a new rule.
2. Select rule type: Click the dropdown list and select Intrusion as the rule type.
Figure 6-34 Select Rule Type
To Next Page
Loading...
Need help?
General
