Video Access Control Terminal User Manual
98
2. Check the checkbox to enable Automatic Time Synchronization.
The Automatic Time Synchronization can operate auto time adjustment to all access control devices added
to the Access Control Client according to specified period and time.
Select the matched day and input the time to operate the time adjustment.
3. You can check the checkbox to enable auto-login.
4. You can click the checkbox to enable the message prompt when the card reader initialization is error.
5. Click Save button to save the settings.
Note: You can click Restore Default Value button to restore the defaults of the general settings.
Card Reader Configuration
Purpose:
The Card Reader should connect with the PC running the client to read the card No..
You should configure the card reader before setting the card.
Note: Currently, the supported card reader types include DS-K1F100-D8, DS-K1F100-M, and DS-K1F100-D8E.
Steps:
1. Click Tool->Card Reader on the menu to pop up the card reader configuration dialog box.
2. Set the parameters about the connected card reader.
3. Click Save button to save the settings.
You can click Restore Default Value button to restore the defaults.
Fingerprint Machine Configuration
The fingerprint machine should connect with the PC running the client for collecting the fingerprint.
Steps:
1. Click Tool->Fingerprint Machine on the menu to open the Fingerprint Machine Configuration page.
To Next Page
Loading...
