Video Access Control Terminal User Manual
100
4. The HDDs of the storage server need to be formatted for the video file and picture storage.
1) Click Storage->General, to enter the HDD Formatting interface.
2) Select the HDD from the list and click Format. You can check the formatting process from the process
bar and the status of the formatted HDD changes from Unformatted to Normal Status.
Note: Formatting the HDDs is to pre-allocate the disk space for storage and the original data of the
formatted HDDs will not be deleted.
5. After formatting of the HDD, you can set the picture storage quota in the Remote Configuration interface.
To Next Page
Loading...
