Video Access Control Terminal User Manual
24
3) Click OK to save the settings.
Adding Online Devices
Purpose:
The active online access control devices in the same local subnet with the client will be displayed on the Online
Device area. You can click the Refresh Every 60s button to refresh the information of the online devices.
Note: You can click to hide the Online Device area.
Steps:
1. Select the devices to be added from the list.
Note: For the inactive device, you need to create the password for it before you can add the device properly.
For detailed steps, please refer to 3.1.1 Activating Device and Creating Password.
2. Click Add to Client to open the device adding dialog box.
3. Input the required information.
Nickname: Edit a name for the device as you want.
Connection Type: Select TCP/IP as the connection type.
IP Address: Input the device’s IP address. The IP address of the device is obtained automatically in this
adding mode.
To Next Page
Loading...
