Video Access Control Terminal User Manual
25
Port: Input the device port No.. The default value is 8000.
User Name: Input the device user name. By default, the user name is admin.
Password: Input the device password.
4. Click Add to add the device to the client.
5. (Optional) If you want to add multiple online devices to the client software, click and hold Ctrl key to select
multiple devices, and click Add to Client to open the device adding dialog box. In the pop-up message box,
enter the user name and password for the devices to be added.
If you want to add all the online devices to the client software, click Add All and click OK in the pop-up
message box. Then enter the user name and password for the devices to be added.
6. You can select the device from the list and click Reset Password to reset the device password.
Perform the following steps to reset the device password.
1) Click Export to save the device file on your PC.
2) Send the file to our technical engineers.
3) Our technical engineer will send you a file or an eight-digit number to you.
If you receive a file from the technical engineer, select Import File from Key Importing Mode
drop-down list and click to import the file.
If you receive an eight-digit number from the technical engineer, select Input Key from Key
Importing Mode drop-down list and input the number.
4) Input new password in text fields of Password and Confirm Password.
5) Click OK to reset the password.
The password strength of the device can be checked by the software. For your privacy, we strongly
recommend changing the password to something of your own choosing (using a minimum of 8 characters,
including upper case letters, lower case letters, numbers, and special characters) in order to increase the
security of your product. And we recommend you reset your password regularly, especially in the high
security system, resetting the password monthly or weekly can better protect your product.
Adding Access Control Device Manually
Steps:
1. Click Add Device on the Device for Management panel to enter the Add Device interface.
To Next Page
Loading...
