Video Access Control Terminal User Manual
52
4. Input the basic information including person name, gender, ID type, ID No., contact No., and address.
5. Click Upload Picture to select the person picture from the local PC to upload it to the client.
Note: The picture should be in *.jpg, or *.jpeg format.
6. Click OK to finish adding.
Adding Person (Fingerprint)
Before inputting the fingerprint, you should connect the fingerprint machine to the PC and set its parameters
first. For details, refer to 8.4.3 Fingerprint Machine Configuration.
Steps:
1. In the Add Person interface, click Fingerprint tab.
2. Click Start button, click to select the fingerprint to start collecting.
3. Lift and rest the corresponding fingerprint on the fingerprint scanner twice to collect the fingerprint to the
client.
You can click Collect from Device and select the device to scan fingerprint.
You can select the registered fingerprint and click Delete Fingerprint to delete it.
You can click Delete All to clear all fingerprints.
4. Click OK to save the fingerprints.
Editing and Deleting Person
You can double-click the added person to edit its basic information and fingerprint.
Or you can check the checkbox to select the person and click Edit Person to edit it.
You can click to select a person, and click Delete Person to delete it.
Note: If a card is associated with the current person, the association will be invalid after the person is deleted.
Importing and Exporting Person Information
The person information can be imported and exported in batch.
Steps:
1. After adding the person, you can click Export Person button to export all the added person information to
the local PC including person No., person name, gender, ID type, ID No., Department, telphone No., and
contact address.
To Next Page
Loading...
