HIKVISION DS-KH9510-WTE1(B) - 2.3 Wake Up the Device; 2.4 Basic Settings; 2.4.1 Set Indoor Station Network Parameters

Figure 2-6 Network Sengs
-
When you select Connecon Type as Wired, you can edit network parameters
manually or automacally.
Set Network Parameters Automacally
Enable DHCP, the device will get network parameters automacally.
Set Network Parameters Manually
Edit Local IP, Subnet Mask and Gateway parameters.
-
When you select Connecon Type as Wireless, and select an Wi-Fi from the
drop list to connect.
5.
Congure the indoor staon parameters and tap NEXT. Or you can tap Skip to skip
the indoor staon parameters sengs.
Figure 2-7 Indoor Staon Sengs
Video Intercom 9 Series Indoor
Staon Conguraon Guide
5