HIKVISION DS-KH9510-WTE1(B) User Manual

Zone Sengs
You can set the zone type, alarm type and delay me and other parameters of 8
zones.
Before You Start
Wake up the device. Refers to Wake Up the Device for details.
Tap
Sengs → Advanced Sengs to enable Zone Alarm funcons.
Steps
Note
Arming status page and zone sengs page are hidden by default. You should enable
alarm funcon rst.
1. On the main page of the device, tap Sengs → Preference → Zone Sengs to
enter the zone sengs page.
Figure 2-16 Zone Sengs
2. Press a zone to pop up the zone eding dialogue box.
3. Set the zone type, alarm type, status of arming status, enter delay, and exit delay.
4. Tap OK to save the sengs.
Note
●
7 zone types are selectable: Panic Buon, Door Magnec, Smoke Detector,
Acve Infrared, Passive Infrared, Gas Detector, and Doorbell.
●
3 alarm types are selectable: 24h Alarm, Instant Alarm, and Delay Alarm.
Set the alarm type as 24h alarm, and the zone will be armed for 24h.
Set the alarm type as instant alarm, and the zone will alarm once it's triggered.
Video Intercom 9 Series Indoor Staon Conguraon Guide
14

HIKVISION DS-KH9510-WTE1(B) Specifications

General

Brand	HIKVISION
Model	DS-KH9510-WTE1(B)
Category	Intercom System
Language	English