HIKVISION DS-KH9510-WTE1(B) User Manual

Set the alarm type as delay alarm, and you should set the enter delay duraon
and exit delay duraon.
●
Both the enter delay duraon and the exit delay duraon are from 30s to 60s.
●
For Gas Detector and Smoke Detector, the alarm type is set as default 24h
alarm. The alarm type of them can not be changed.
Arming Mode Sengs
4 arming modes can be congured: stay mode, away mode, sleeping mode and
custom mode.
Before You Start
Wake up the device. Refers to Wake Up the Device for details.
Tap Sengs → Advanced Sengs to enable Zone Alarm funcons.
Note
Admin password is required to enter the advanced sengs page.
Steps
Note
Arming status page and zone sengs page are hidden by default. You should enable
alarm funcon rst.
1. On the main page of the device, tap Sengs → Preference → Scene Sengs to
enter the arming mode sengs page.
Figure 2-17 Scene Sengs
2. Tap Stay, Away, Sleeping, or Custom to enter the page.
Video Intercom 9 Series Indoor
Staon Conguraon Guide
15

HIKVISION DS-KH9510-WTE1(B) Specifications

General

Brand	HIKVISION
Model	DS-KH9510-WTE1(B)
Category	Intercom System
Language	English